10 Mixed Metal Technique For drawing. The addition of metal to a Mixed Media project can increase immediately. Something about the weight, color, and patina made of metal invites you to a second look. While learning metal techniques may seem a little intimidating, the opposite is true: the metal is straightforward to manipulate, dyeing, and consistency and does not require arsenal tools. The artists also discovered unique opportunities to add artwork and metal effects. Read for suggestions for metal techniques that inspire your next project.
Roxanne Evans Stout often uses metal fonts in her collages; Vintage cans, silverware, and watch parts often play with the role starting from their convincing graphics as they show them in their book, their metal techniques to work with vintage doses are noteworthy, as these pieces In flea markets and flea shops that are easy to find, and the graphics and beautiful patina do them out. Drill a cut on every corner, cut a groove on every corner, and hit the box plate with a hammer. To connect it to a substrate, for example, B. A wooden vessel, sign where you want the holes, create holes with a drill or hammer and nail and connect the tin with small nails or pins. Roxanne has another great tip: if your nails are in use, a shiny and modern appearance, give them age by deceiving a bit of challenging acrylic paint with cool drawing ideas.
Rust never rests
We consume most of our lives dodging rusty items until we discover how cold they are. In addition to adding consistency and style to assembly, rusted bits can also be used for printing on fabric and paper. Jennifer Coyne Queen showed some of the brand marking miracles with rust in “Make your brand: Rostmarken” Since rust is corrosive and destructive, she says, “It’s beautiful, mysterious and lunatic.” To create rust prints on paper:
- Put some rusty metal in your art magazine (flat objects like washing machines and hinges good).
- Pour a small vinegar on the metal, or put a sachet of wet tea on the upper part – the acid is helpful to activate the rust. You can spread the rust on other pages of your newspaper or lock it by scrolling a freezer document next to the rusty sides (the glossy side towards the west side).
- Close the book, place a weight on the top, and wait 24 hours before opening the book and seeing what surprises are inside.
Turn back and forth
Metal processes such as trimming, shaping, and texturing are not as tricky as sound, and methods require special tools. Jen Cushman explains how to create a simple jewelry component in Mixed Technical Metalist. The inclination component “starts with a 24-gauger sheet piece in a disc cutter, a tool that offers circular metal shapes (can also cut the metal with saw jewelry). Snips metal use sheet then cuts a Bio-circle to cut the negative space just perforated, creating a knee pad. Cinematographic the edges, place the piece on a bank block and hit them several times with a PEEN HAMMER sphere to create dimples. Everything you need to create a shutter is a bar Switching to make wire. Shows Jen other ways to use the component, e.g., B. Adding a collage or closure for a handbook.
Let’s start celebrating
Instead of launching the soda can in the recycled container, you should use it for your next media mixed project. Darlene Olivia Mutay and Sandra Duran Wilson show an excellent technique for printing soda doses. Cut the upper and bottom of the can, cut the length, and cut the edges. On the unprinted side, brush the digital floor with the colors of the golden artist and let it dry. Paste the can to a carrier leaf, run it through a printer, remove the tape, and spray the tin with a processable fixing agent.
The process is simple after the techniques of Annie Waldrop in nature in nature:
- Wire doll dresses.
- Cut a 19-gauge thread for every section or dress line using a doll fabric or a dress pattern.
- Form the line with the pliers in the bars of the apparel form; Make ovals for sleeve doors and the bottom of the skirt.
- Use the form of clothing to cut appropriate parts of ephemeral or fabrics and adjust the edges of the wire structure.
- Sew the pieces with needle and wire on the wires.
Annie’s extraordinary dimension graphics includes vintage documents, wooden buttons, photographs, wire mesh, branches, and more.
I have an engraving
The metal radiation creates fantastic structured designs, but the process requires chemicals, patience, and time. Jen Cushman has discovered a way to achieve similar results and shared his technique in the Mixed Medalemith faux engraving on copper. Starting from a 26 gas copper sheet, a slight texture is added with a penetrating ball hammer focused on the edges. The metal is washed to empty dirt or external oils and forged with a rubber stamp and transparent embossing ink. Then the metal is positioned on a heat-proof surface, like a brick Fire-fighting or a glowing with pumice and a gently heated butane torch. When it is heated, the metal starts dyeing, and the printed area is easily obscure. Remove the flame as soon as the image is displayed.
Metal is not so heavy
Do you want the metal appearance without mass? Try transferring glossy metal slides as a metal sheet and ridiculously easy to use. In the book of Christine Adolph, tons of techniques at films and metal effects; start with the adhesive plates (uses easy-cut ICraft adhesive plates with Thermo or Web). Cut the shapes of hand or with a nozzle cutter, pull out the courier and chew them in a sheet of paper. Disconnect the upper layer (the image is clear) and apply the transfer sheet to the beginning to ensure that the color page is upwards. Burn the sheet with your fingers and peel the slide to view the very lovable, shiny, and thwarted images.
Also Read: What is The Bespoke Tailoring Process